Shore Power Max Menu - Dometic Go Power! C Series User Manual

OPERATION

4.3 SHORE POWER MAX MENU

Menu Heading
Shore Power Max
The shore power max menu enables the user to quickly change your shore max setting to coordinate with the circuit breaker rating
from the incoming AC source. This setting ensures the AC loads receive the maximum current available from the utility / generator.
When the total current used to power the AC loads (appliances) and charge the batteries begins to approach the shore pow max setting,
the current that was used for charging the batteries is reduced. This ensures the AC loads have the required current to keep operating.
Set the shore power max setting to match the current rating of the utility power or the generator's circuit breaker. If you are using two
AC Input sources (utility and generator) to the
smaller AC circuit breaker size of the two AC power sources.
The IC Series has 2 inputs (AC HOT 1 and AC HOT 2), but the current is only monitored on AC HOT 1. If you wire the Inverter/Charger
in Single In - Single Out (50A) configurations (see the IC Series user manual) the shore power max setting should be set to 1/2 the
input breaker size, which will be 25A (50A/2 = 25A). This is because half the current will pass through AC HOT 1 and the other half
through AC HOT 2 simultaneously.
INVERTER
SHORE POW. MAX
ON/OFF
CHARGER
ON/OFF
"ENTER MENU"
INVERTER SHORE POW. MAX
ON/OFF
CHARGER
ON/OFF
INVERTER DC Status
ON/OFF
CHARGER
ON/OFF
Selections / Adjustments Range
Inverter/Charger
®
SHORE POWER
25.0
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
®
SHORE POWER
0.0
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
"SET"
(Save value)
ENTER / SET BACK
®
SHORE POWER
11.68 V
UNIT READINGS
0.0 A
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
5 - 50A
through an external transfer switch, adjust the shore max setting to the
INVERTER
ON/OFF
CHARGER
ON/OFF
"MODIFY UP"
INVERTER
ON/OFF
CHARGER
ON/OFF
"MODIFY DOWN"
AFTER SAVING
REMOTE WILL GO BACK TO
"DEFAULT HOME SCREEN"
Default Setting
30A
®
SHORE POW. MAX
SHORE POWER
30.0
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
®
SHORE POW. MAX
SHORE POWER
25.0
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
gpelectric.com | [page 19]