Technical Description; Installation; Operation - Dometic AP Remote Installation And Operating Manual

AP Remote
3

Technical description

Item in
Description
fig. 1
1 Channel display
2 Channel selector
3
button: Stows the blind
4
button: Stops blind movement
5
button: Deploys the blind
6 CODE programming button
7 SET programming button
The range of the remote control depends on the location of the receiver and the
materials used in any intervening walls or structures.
4

Installation

➤ Proceed as shown: fig. 2
5

Operation

5.1 Changing channels
I
NOTE
• Each channel can be set to control one blind or up to 9 blinds. All
blinds on a channel will operate at the same time when operating
that channel.
• For a blind with two powered blind units you have to change the
channel and control of each unit individually.
• Channel P is designed to control all channels at the same time.
➤ Press the + button to change to the next channel.
➤ Press the – button to change to the previous channel.
EN
Technical description
3