Annex; A Intelligent Domestic Hot Water; Status Codes - Saunier Duval IsoTwin Condens T 26-CS/1 Instruction Manual

Machine Translated by Google

Annex

A Intelligent domestic hot water reheat function - result of a
learning phase over one day
AT
1
14
12
10
8
6
4
2
0
0 1 2 3 4 5
AT Drawing volume (l/1/4 hour)
Time
B1
Period without need at night (eco)
B Status codes
Remark
As the code table is used for different products, some codes
may not be visible for the affected product.
The code table only gives an extract of the codes as a whole.
status code
S.000
S.002
S.003
S.004
S.006
S.007
S.008
S.020
S.022
S.024
S.031
S.034
16
2 3
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 B
Meaning
There is no request associated with the heating mode.
The heating mode is active and the heating pump is in the heating phase.
pre-operation.
The heating mode is active and the appliance is in the ignition phase.
The heating mode is active and the burner is in operation.
The heating mode is active and the fan is in the on phase at
empty.
The heating mode is active and the heating pump is in the heating phase.
empty walking.
The heating mode is active and the appliance is in the phase of cutting off the
burner.
There is no demand associated with the hot water tank load
sanitary.
Domestic hot water tank charging is active and the pump is
in the pre-operation phase.
Domestic hot water tank charging is active and the burner is
Operating.
Heating mode is disabled and there is no water demand
sanitary hot.
The frost protection function is active.
4 2
2
Periods of high needs (comfort)
3
Average requirement
4
Periods of low need (eco)
Instructions for use IsoTwin Condens 0020294193_00
4