FrontRow CB6000 Installer's Manual page 33

7. Customize Touch Screen Behavior
• Choose Touch Screen
a.
Select the desired behavior for dimming the screen between screen touches under Dim Mode:
• Disabled (i.e. the screen will never dim)
• 50% Dim (the screen dims slightly)
• Max Dim (the screen dims but the detail is still visible)
• Screen Off (the screen goes completely dark)
• Enter the delay in minutes between a screen touch and entering dim mode under Timeout Period
• Click Save Settings in the top section
b.
Select the conditions upon which the CB6000 will 'fall back' to a default screen under Fallback Mode:
• None (i.e. the screen will never change from the last screen used)
• On Timeout (the screen will change after a defined period of inactivity)
• On Main Home Press (the screen will only change if the user presses the page 1 Home button)
• On Either (the screen will change either upon pressing the page 1 Home button or upon a defined period
of inactivity)
• Select the screen that the CB6000
will 'fall back' to between screen
touches Fallback Screen:
• Current (when Panel Lock is
enabled below, transitions
to the unlock keypad screen;
otherwise, no transition
occurs)
• Clock Screen (a large clock)
• Info Screen (the text screen
descriptor page; often used
for the institution's name)
• Splash Screen (the graphic
screen; often used for the
institution's logo)
• Enter the delay in minutes
between the last screen touch
and changing to a default screen
under Timeout Period
• Click Save Settings in the middle section
c.
The panel buttons can also be locked to prevent tampering.
Check Panel Lock Enable
•
• Set a Password for unlocking the panel (the default is 1357; must be a 4- digit odd number)
• Click Save Settings in the bottom section
You can also use the Lock/Unlock Now buttons to test the behavior or initiate modes remotely.
30