FrontRow CB6000 Installer's Manual page 32

5. Advanced Serial Port Settings
• Choose Serial Ports. The current settings can be viewed at the bottom of this web page. As needed, make the
following port setting adjustments (e.g., as needed for controlling a specific projector):
• COM Port number (default is 1)
• Baud Rate (default is 19200)
• Stop Bits (default is 1 Bit)
• Parity (default is No Parity)
• Click Save Settings
6. Set the Time
• Choose Time
• Either type the data into the fields provided or press the Load Computer Time button to retrieve the com-
puter's current time/date.
• To enable (or disable) the Day Light Saving (DST) mode, click the box to Honor the Daylight Saving Transition
Table. A message below the check box indicates whether DST is currently OFF or ON. A three- column table
at the bottom of the view displays the current defined year and the next three years. No actual DST data can
be changed with this interface. Contact FrontRow Technical Service at customercare@gofrontrow.com for DST
modifications.
• Check the option box Display clock in 24-hour format to have the time displayed in the 24 hour format (if not
checked, the time will be displayed in a 12 hour format).
• Click Save Settings
29