FrontRow CB6000 Installer's Manual page 15

8. Select Time from the left-hand menu
9. Click Load Computer Time
10. Check the option box Display clock in 24-hour format to have the display time in the 24 hour format
(if not checked, the time will be displayed in a 12 hour format).
11. Click Save Settings
12. Now define the IP address of this CB6000. Select Ethernet from the left-hand menu
13. Change the IP address, subnet mask, and router IP address to the appropriate values for this CB6000
(Reference your Installer Planning Template; see Step 1)
14. Click Save Settings (your browser will likely timeout; this is normal)
15. Disconnect the CB6000 from the Cat 5 cable, replace it in its anti-static bag, and apply a label with the
room number written on it so you are sure to install it in the right place on the job site.
16. Connect your next CB6000 and repeat Step 3.4 'Load the Configuration' until all of your units are
programmed. Note that on some Windows
to communicate with the next device. See Appendix F.
computers, you may need to clear the ARP cache in order
®
12
Be sure to set the
network router IP
address so that you can
access the CB6000 from
other devices, including
iPad running FrontRow
Teacher Edition.