Setting The On/Off Timer - Samsung AM NJD Series User Manual

Setting the On/Off timer

You can set the air conditioner to be turned on or off automatically at desired time.
Setting the On timer
When the air conditioner is turned off.
Remote controller display
Select the mode from (Auto)  (Cool)  (Dry)  (Fan) and  (Heat).
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto/Cool/Dry/Heat mode. In Fan mode, temperature
cannot be adjusted.
• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On)
indicator will remain on the remote controller display thereafter.
NOTE
20
1. Press the Timer button to select (On).
- (On) indicator will keep blinking and you can set the time.
2. Press the < or > button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display)
~ 3 hours and hour unit from 3 ~ 24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed on the
remote controller display.
- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the (On) indicator
on the remote controller display.
f Press the Timer button  select (On)  press the < or > button
Cancel
 set the timer to
Additional options available in On timer
 press the SET button.