Samsung AM NJD Series User Manual page 13

Removing the front panel
Grab the top portion of the front panel and pull the front cover towards yourself. Unhook the safety string and lift up
the front panel.
Viewing the power button and parts under the panel
You may locate the Power button among with the mode indicators. When the front panel is open, you may locate the
temperature sensor and the Air flow switch. Temperature sensor is located on the top left side of the air conditioner
just above the anti-allergy/deodorizing filter slot and the Air flow switch is located on the top right corner of the air
conditioner.
You can turn on the air conditioner in Auto mode by pressing the Power button.
When you set the Air flow switch on Auto, it will open the bottom air outlet in Cool, Heat and Fan modes. However, in
Silence mode, the bottom air outlet will be closed. Also, in Cool mode, the bottom air outlet will be closed within an
hour. When you set the Air flow switch on Off, the bottom air outlet will be closed.
The room temperature sensor measures indoor room temperature.
Room temperature sensor
Power button
Air flow switch
Auto Off
Au to
Off
13