Table of Contents
Advertisement
Maintaining your air conditioner
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best
condition.
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4
hours and disconnect the power plug. There may be internal damage if
moisture is left in components.
2. Before using the air conditioner again, dry the inner components of the
air conditioner again by running in Fan mode for 3 to 4 hours. This helps
remove odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Clean the air filter (1)
Clean the condensate drain pan (2)
Indoor unit
Thoroughly clean the heat exchanger (2)
Clean the condensate drain pipe (2)
Replace the remote control batteries (1)
Clean the heat exchanger on the outside of the unit (2)
Clean the heat exchanger on the inside of the unit (2)
Clean the electric components with jets of air (2)
Verify that all the electric components are firmly
Outdoor unit
tightened (2)
Clean the fan (2)
Verify that all the fan assembly is firmly tightened (2)
Clean the condensate drain pan (2)
This check mark requires checking the indoor/outdoor unit periodically, following to the description to
maintain the air conditioner properly.
NOTE
-
The described operations should be performed more frequently if the area of installation is very dusty.
These operations must always be performed by qualified personnel.
CAUTION
For more detailed information, see the Installation Manual.
Description
Every 4
Monthly
months
Once a
year
27
Advertisement
Table of Contents
