Connecting a video monitor
Connect a video monitor as follows to view
captured images and to check those to be printed.
To AC power source
To 3G-SDI (HD/SD) output
75
connector
5C-FB or equivalent
To video input connector
Video monitor
Power cord
To AC IN
coaxial cable with BNC
Connecting a foot switch
The printer can be controlled remotely by
connecting the FS-24 Foot Switch (not supplied),
or a computer.
Computer
RS-232C cable
To RS-232C
FS-24 Foot Switch
(not supplied)
a) When controlling the printer from a computer, set the
appropriate baud rate. See "Setting the
communication speed with a printer" (page 73).
16
a)
To AC power source
Power cord
To AC IN
To REMOTE