Table of Contents
Advertisement
1-6. Where to Go from Here
To locate specific information concerning the installation and operation of the 5820A
calibrator, refer to the following list.
•
Unpacking and setup: see Chapter 2
•
Installation and rack mounting: see Chapter 2 and the rack mount kit instruction sheet
•
AC line power and interface cabling: see Chapter 2
•
Controls, indicators, and displays: see Chapter 3
•
Front panel operation: see Chapter 4
•
Cabling to a UUT (Unit Under Test): see Chapter 4
•
Using the auxiliary amplifier: see Chapter 4
•
Remote operation (IEEE-488 or serial): see Chapter 5
•
Accessories to the 5820A Calibrator: see Chapter 9
•
Instrument specifications: see Chapter 1
1-7. Instruction Manuals
The 5820A Manual Set provides complete information for operators and service or
maintenance technicians. The set includes:
•
5820A Operators Manual (PN 802154)
•
5820A Service Manual (PN 673142)
The 5820A Operators Manual ships with the instrument. The 5820A Service Manual is
optional. Order additional copies of the manuals separately using the part number
provided. For ordering instructions, refer to the Fluke Catalog, or ask a Fluke sales
representative (see Chapter 2 for more information).
1-8.
5820A Operators Manual
The 5820A Operators Manual provides complete information for installing the 5820A
Oscilloscope Calibrator and operating it from the front panel keys and in remote
configurations. This manual also provides a glossary of calibration, specifications, and
error code information. The 5820A Operators Manual includes the following topics:
•
Installation
•
Operating controls and features, including front panel operation
•
Remote operation (IEEE-488 bus or serial port remote control)
Introduction and Specifications
Where to Go from Here
1
1-7
Advertisement
Table of Contents
