Advertisement
Stage Five — Configure the System
Stage Five — Configure the System
Stage 5
Items needed to help complete this stage:
• Laptop (or PC) with a network connection
• GC 2 configuration program (download from www.extron.com)
• MLC 104 IP Plus User's Manual
• Projector manufacturer's user's manual
• Device driver and/or driver package
(download from www.extron.com)
1. Configure the system
a. Download and install Extron's Global Configurator
(GC2) configuration program (available at
www.extron.com) on the laptop or PC
b. Ensure the laptop (or PC), and the MLC 104 IP Plus are
connected to the LAN.
N If this is not possible, connect a 2.5 mm TRS
configuration cable (part # 70-355-01) to the laptop
(or PC) and to the front panel configuration port of
the MLC 104 IP Plus.
c. Launch GC2. Click on Help, then Contents (or press F1).
2-26
PoleVault Systems Installation • Installation — Stage 5
1a Load Global Configurator 2 software
Launch the Global Configurator 2
1c
program
Advertisement
