Download Print this page

Extron electronics PoleVault Systems PVS 300 Installation Manual page 3

Polevault systems

Advertisement

Introduction
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. The Class A limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Overview
This manual covers the installation of the Extron PoleVault
structural ceiling. If the location has a concrete or beam style ceiling, alternative ceiling mounts can be obtained
separately from Extron (see 2c, "Optional items", later in this chapter). For those types of installation, refer to the
individual mounting hardware user's manuals for method.
It is assumed that the installer has some knowledge and experience of A/V, electrical, or electronic device
installation. This manual guides the A/V installer through the steps for installation and connection of each of the
system's component parts.
It may be that the locations for the devices (e.g., wall plates, projector, and screen) have been pre-determined.
However, some room installation examples are given to help in installations where final location is yet to be
determined.
The PoleVault System
Extron PoleVault Systems are easy-to-use, network-enabled, all-inclusive packages, making them ideal for single-
projector K-12 classrooms. PoleVault Systems use economical twisted pair cables for transmitting signals and
include network connectivity for Web-based asset management, monitoring, and control.
N The hardware and devices listed on the inventory pages have individual user manuals which have detailed safety
information, installation, set-up, and configuration instructions, and should be referred to as needed.
For operation and set up of the projector, screen, and input devices, refer to the relevant manufacturer's manuals
supplied with those devices.
System in a drop ceiling room with a wood or concrete
PoleVault Systems Installation • Introduction
1-1

Advertisement

loading