Using Presets - Extron electronics MAV Plus Series User Manual

Using presets

The current configuration (configuration 0) can be saved as a preset in any one of
32 preset memory addresses. Preset locations are assigned to the input buttons and
(where necessary) output buttons. Up to 20 or 32 (depending on the number of
input and output buttons) presets can be selected from the front panel to be either
saved or retrieved. When a preset is retrieved from memory, it becomes the current
configuration.
N • Only the audio and video ties are stored and recalled; RGB delay and audio
gain and volume settings are not saved, and they do not change when a preset
is recalled.
• Presets cannot be viewed from the front panel unless recalled as the current
configuration. Presets can be viewed using Extron's Windows-based control
program. See chapter 5, "Matrix Software", for more details.
• The current configuration and all presets are stored in non-volatile memory.
When power is removed and restored, the current configuration is still active
and all presets are retained.
• When a preset is recalled, it replaces the current configuration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the
current configuration ties in favor of the preset configuration ties.
• All models have 32 presets; on models with fewer than 32 input and output
buttons, preset numbers that are too high to be available from the front panel
are still accessible under serial port or Ethernet control.
• Figure 3-42 shows the presets associated with the two input and output
button configurations for the CrossPoint and MAV matrix switchers.
24 x 12, 24 x 24, 32 x 16, and 32 x 32 matrix sizes
Preset Preset
1
1 2
Input
buttons
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Preset Preset
17
8 x 16, 16 x 4, 16 x 8, 12 x 12, and 16 x 16 matrix sizes
Preset Preset
1
Input
1 2
buttons
Output
1 2
buttons
Preset Preset
17 18
8 x 4, 8 x 8, 12 x 4, and 12 x 8 matrix sizes
Preset Preset
1
Input
1 2
buttons
Output
1 2
buttons
Preset Preset
13 14
Figure 3-42 — Preset locations by matrix size
Preset Preset Preset Preset Preset Preset
2 3 4 5 6 7
3 4 5 6 7
Preset Preset Preset Preset Preset Preset
18 19 20 21 22 23
Preset Preset Preset Preset Preset Preset
2 3 4 5 6 7
3 4 5 6 7
3 4 5 6 7
Preset Preset Preset Preset Preset Preset
19 20 21 22 23
Preset Preset Preset Preset Preset Preset
2 3 4 5 6 7
INPUTS
3 4 5 6 7 8
3 4 5 6 7
OUTPUTS
Preset Preset Preset Preset Preset Preset
15 16 17 18 19
CrossPoint / MAV Matrix Switchers • Operation
Preset Preset Preset Preset Preset
8 9 10 11 12 13
8 9 10 11 12 13 14 15 16
Preset Preset Preset Preset Preset
24 25 26 27 28 29
Preset Preset Preset Preset Preset Preset
8 9 10 11 12 13
INPUTS
9 10 11 12 13
8
9 10 11 12 13
8
OUTPUTS
Preset Preset Preset Preset Preset Preset
24 25 26 27 28 29
Preset Preset Preset Preset
8 9 10 11 12
9 10 11 12
NOTE
Presets 21 through 32 are available via RS-232/
8
RS-422 and Ethernet control only
20
Preset Preset Preset
14 15 16
I
N
P
U
T
S
Preset Preset Preset
30 31 32
Preset Preset
14 15 16
14 15 16
14 15 16
Preset Preset
30 31 32
3-31