Example 4: Viewing Video And Audio, Audio Only, And Video Only Ties - Extron electronics MAV Plus Series User Manual

Example 4: Viewing video and audio, audio only, and video only ties

In the following example, we view the video and audio, audio-only, and video-only
ties in the current configuration. The steps show the front panel indications that
result from your action.
N This example assumes that you have performed example 1, example 2, and
example 3.
1. Press and release the Esc button (figure 3-23).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ENTER PRESET
The button flashes once.
Figure 3-23 — Clear all selections
2. Press and release the View button to enter View-only mode. The View button
lights red.
3. To select both video and audio for viewing, if necessary, press and release the
RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the
Audio button (figure 3-24).
Press the RGBHV/ Video
button to toggle on and off.
The button lights green
when selected.
Until you select an input, the buttons for all untied
outputs light amber if no inputs are tied, green if
no video inputs are tied (only audio is tied), or
red if no audio inputs are tied (only video is tied).
Red Amber Unlit
1 2
17 18 19 20 21 22 23 24 31 32
Figure 3-24 — Select RGBHV or video and audio
ESC
Press the Audio button
I / O
to toggle on and off.
VIDEO AUDIO
The button lights red
when selected.
3 4 5 6 7 8 15 16
CrossPoint / MAV Matrix Switchers • Operation
O
U
T
P
U
T
S
3-21