Sony SEL1635GM Service Manual page 64

6. Rotate the focusing ring more than one rotate.
Focusing ring
7. "Rotate Ring STOP" is displayed, press the ENTER key.
8. When the ENTER key is pressed, automatically starts the focus-
ing ring adjustment.
9. After the focusing ring adjustment is completed, message screen
is displayed in the following.
10. Set for the focusing ring to the position of the tape etc. stuck by
"Preparations".
11. "Rotate Ring START" is displayed, press the ENTER key.
12. Rotate the focusing ring in one direction, and stop at accurately
twice rotated positions.
Note: Do not rotate in the reverse direction at the halfway.
Focusing ring
13. "Rotate Ring STOP" is displayed, press the ENTER key.
14. "LENS DEVICE (FOCUS RING) CHK OK" is displayed, press
the ENTER key.
15. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and "FINISHED" is displayed when the process is completed,
then click the [OK] button.
5-26
SEL1635GM