Sony SEL1635GM Service Manual page 23

2-3-6. 4-5 GROUP BLOCK
4-5 group block
5 Install the 4-5 group block assy.
6 3 group flexible board
2 Rotate the 5 group rear block in the
direction of the arrow, and install it.
1 5th gap washer
Note 1: Install exactly as recorded during
disassembly.
rear (mount) side
4 Insert the flexible board
front (lens) side
9 5th FPC plate
8 two bosses
7 3 group flexible board
in the 5th FPC plate.
3 Make valley fold on the
flexible board.
qs two screws (special head (M1.4
qa cam pin G_E
0 three cam followers G_B (5.0_4.5_4.0)
Note 2: When replacing the cam follower G_B (5.0_4.5_4.0),
choose parts that do not cause backlash and confirm
that movement is smooth.
2-20
SEL1635GM
2.5))
qa cam pin G_E
qa cam pin G_E