Mounting On Machine-Tool Table - Bison 5901 Instruction Manual

3.3. Mounting on machine-tool table

Super spacers may be mounted on machine-tool table in two positions:
a) in vertical position (Fig. 2),
b) in vertical position (Fig. 3),
Mount the spacer, in both positions, with two bolts 25. If spacer is mounted in vertical
position secure it with clamping lug 60 as shown in Fig. 2.
Use T-slots of machine table and two fixing inserts 23 (Fig. 5) for positioning and
mounting super spacer.
ATTENTION: Clamping lugs are not supplied with spacers.
Fig. 2
5
Fig. 3