Setting An Admin Password - Lindy 32353 User Manual

All manuals and user guides at all-guides.com
To switch on the password security system:
From the main on-screen menu press
SETUP OPTIONS
Select
Move the menu bar over the
SPACE BAR
Press
ESC
Press to quit from the menu.

3.3 Setting an ADMIN password

The LINDY CPU Switch Dual MP supports up to 16 user profiles. The administrator
of the system can grant or deny users access to any of the connected computers and
has complete control over the setup of the system. The administrator accesses the
system via a special user named ADMIN. This profile may not be altered or deleted
from the system and has full access rights to all computers and system parameters.
Consequently it is advisable to set a password for this user.
To set a password for the ADMIN user:
From the main on-screen menu press
EDIT USER LIST
Select
Move the menu bar over the
RETURN
Press or
RETURN
Press or
Make sure that the password you want is displayed.
RETURN
Press or
You will now see the "Edit Access Rights" menu. The ADMIN user always has
access to all the computers. Press
menu.
3.4 Creating and editing user accounts
To create user accounts:
Ensure that you are logged on as the ADMIN user.
From the main on-screen menu press
EDIT USER LIST
Select
INSERT
Press to add a new user.
Type in the name of the new user and press
LINDY CPU Switch Dual Multi-Platform
F1
from the menu.
SECURITY
to enable security.
F1
from the menu.
ADMIN
user.
ENTER
to edit the ADMIN user.
ENTER
again to edit the ADMIN user's password.
ENTER
to save the password.
RETURN
F1
from the menu.
MORE MENUS
for .
option.
MORE MENUS
for .
ENTER
or again to quit from this
MORE MENUS
for .
RETURN ENTER
or
Installation and Use
.
Page 26