Lindy 32353 User Manual page 24

All manuals and user guides at all-guides.com
If you have switched off your LINDY CPU Switch or you are attempting to 'hot plug' it
into a system that is already running, you may be able to restore lost mouse
movement using the LINDY CPU Switch's mouse restoration functions.
Mouse restoration functions should be used with care as unpredictable results
may occur if the wrong mouse type is selected. If in doubt restore the mouse
by powering down the PC normally.
Standard PS/2 mouse data uses a different data format to IntelliMouse data and so
two reset functions are provided on the LINDY CPU Switch. The type of data format
expected by the PC depends upon the driver and the type of mouse that was
connected when the driver was booted. The following table may be used as a guide.
Note that the mouse reset functions predict the likely mouse resolution settings but
may not restore the speed or sensitivity of the mouse exactly as they were when the
PC originally booted.
Type of mouse / system
connected at bootup
PS/2
PS/2
IntelliMouse / CPU Switch
IntelliMouse / CPU Switch
To restore lost mouse movement on a CPU connected to the LINDY CPU Switch:
1) Select the CPU that has lost its mouse movement
2) Activate the on-screen menu using the keyboard hotkeys
3) Press F1 to view additional menus
4) Select the FUNCTIONS menu
5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE
6) Exit the on-screen menu
LINDY CPU Switch Dual Multi-Platform
Driver type Likely expected
data format
PS/2 only PS/2
IntelliMouse PS/2
PS/2 only PS/2
IntelliMouse IntelliMouse
Installation and Use
Suggested
restoration
Standard
Standard
Standard
IntelliMouse
Page 23