Lindy 32353 User Manual page 45

All manuals and user guides at all-guides.com
'HOTKEYs' and '1'
- selects channel 1
'HOTKEYs' and '2'
- selects channel 2
'HOTKEYs' and '3'
- selects channel 3
'HOTKEYs' and '4'
- selects channel 4
'HOTKEYs' and '5'
- selects channel 5
'HOTKEYs' and '6'
- selects channel 6
'HOTKEYs' and '7'
- selects channel 7
'HOTKEYs' and '8'
- selects channel 8
'HOTKEYs' and '9'
- selects channel 9
'HOTKEYs' and '1 then 0'
'HOTKEYs' and '1 then 1'
'HOTKEYs' and '1 then 2'
'HOTKEYs' and '1 then 3'
'HOTKEYs' and '1 then 4'
'HOTKEYs' and '1 then 5'
'HOTKEYs' and '1 then 6'
'HOTKEYs' and 'TAB'
'HOTKEYs' and 'M'
- displays the on-screen menu for selecting computers by name
(this is the recommended way of selecting computers for systems with more than 4
computers)
'HOTKEYs' and 'A'
- selects autoscan mode where each channel is displayed for
the selected time (see section 3.6.11). To cancel autoscan mode simply select any
fixed channel either by hotkey or by using the on-screen menu or the front panel
controls.
'HOTKEYs' and '0'
— switches off the video signal. This will cause some monitors to
go into standby mode or switch off. The video signal can be re-enabled by selecting
a channel.
'HOTKEYs' and 'L'
- Logs out the user if password security has been enabled or
disables the video and selects the non-existent channel '0' if no security is set.
'HOTKEYs' and 'the cursor keys'
around the screen.
'HOTKEYs' and '0 then {number}'
LINDY CPU Switch Dual Multi-Platform
- selects channel 10
- selects channel 11
- selects channel 12
- selects channel 13
- selects channel 14
- selects channel 15
- selects channel 16
- selects the next available channel
- Moves the currently displayed on-screen menu
— (where {number} is 0,1,2,3,4,5,6,7,8 or 9).
(16 port models only)
(16 port models only)
(16 port models only)
(16 port models only)
(16 port models only)
(16 port models only)
(16 port models only)
(16 port models only)
Installation and Use Page 44