Dometic C154F Installation And Operating Manual page 20

Operation
✔ The display flashes while you adjust the setting.
✔ Once you have set the temperature, the display shows the current temperature
of the interior.
I
NOTE
When using the wine cooler for the first time or if it has not been used for
a long time, the inner temperature could differ from the one you have
set. The temperature display flashes as long as this is the case. Once the
set temperature has been reached, the temperature display lights up
constantly.
Checking the set temperature
➤ Press the
or
✔ The set temperature is shown in the display for 5 seconds.
Then the display shows the current inner temperature again.
I
NOTE
In the event of an interruption to the power supply (power failure, switch
over) the previous temperature settings are not saved. The temperature
returns to the default temperature.
Monitoring the temperature
The warning signals prevent the temperature from falling or rising too much unno-
ticed, which could affect the quality of the wine. Once the wine cooler has reached
the set temperature, the warning signal and the temperature display flashing stops.
A warning signal sounds and the temperature display flashes in the following cases:
• The inner temperature deviates from the set temperature by more than 5 °C.
To switch off the warning signal prematurely:
➤ Press the
button briefly
✔ The temperature display flashes until the set temperature is reached. The display
is then illuminated constantly and indicates that the alarm system is active again.
Storing and serving temperatures for wine
The recommended storing temperature for white wine and red wine is between
10 °C and 14 °C.
The serving temperature depends on the origin and grape.
20
button briefly.
.
C154F, D154F
EN