Closing The Switcher - Extron electronics DVI Output Card Installation Manual

Installation, cont'd

Closing the Switcher

1.
2.
3.
4.
Extron USA - West Extron USA - East
Headquarters
+800.633.9876
+800.633.9876 Inside USA / Canada Only
Inside USA / Canada Only
+1.919.863.1794
+1.714.491.1500 +1.919.863.1797 FAX
+1.714.491.1517 FAX
Reconnect the two fan power cords to connectors J8 and J13 on the
main board. It does not matter which fan is connected to which
connector.
Replace the top cover on the switcher.
Fasten it with the screws that were removed in "Opening the
Switcher", step 3 and step 4.
Reinstall the switcher and reconnect all cables.
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
© 2009 Extron Electronics. All rights reserved.
Extron Asia Extron Japan
+800.7339.8766 +81.3.3511.7655
Inside Asia Only +81.3.3511.7656 FAX
+65.6383.4400
+65.6383.4664 FAX
Extron China Extron Middle East
+400.883.1568 +971.4.2991800
Inside China Only +971.4.2991880 FAX
+86.21.3760.1568
+86.21.3760.1566 FAX