[Panel] Button; Volume Knob - Boss KATANA-110 BASS Owner's Manual

MEMO
To switch between BANK A and BANK B, hold down the [PANEL]
button for approximately one second when any one of the [CH 1]–
[CH 3] buttons are selected.
The selected [CH1]–[CH3] button blinks, and the bank switches
between BANK A and BANK B. When BANK B is selected, the
[PANEL] button blinks slowly.
* You can't switch banks while PANEL is selected.
[CH 1]–[CH 3] buttons
The [CH 1]–[CH 3] buttons remember the settings of all top panel
knobs (except for the [MASTER VOLUME] knob and [POWER
CONTROL] switch) and buttons. When you press and hold a
button for one second, the panel settings are stored.
* You can make the settings back to the factory state by turning
the power on while holding down the [PANEL] button.

[PANEL] button

Makes the unit sound using the current settings of the panel
knobs.
8
[MASTER] knob
[VOLUME] knob
Adjusts the volume.
[TWEETER] button
Turns the tweeter on/off.
9
[POWER CONTROL] switch
Lets you switch the output level of the power amp. By selecting
"STANDBY" you can mute the sound while leaving the unit
powered-on. This lets you mute the amp without changing the
volume or other settings when you leave the stage, such as
between sets of your live performance.
10
[POWER] switch
Turns the power on/off.
Panel Descriptions
5