Panel Descriptions - Boss DUAL CUBE BASS LX Owner's Manual

Panel Descriptions

Top Panel
1
1
INPUT jack
Connect your bass guitar here.
2
[COMP/DRIVE] button
Sets the comp and distortion effects.
If this is "OFF", these effects are not applied.
[DRIVE] button
To use the distortion effects, press the [DRIVE] button to make it
light up.
3
[AMP TYPE] knob
Selects the amp type.
Type Explanation
SUPER FLAT
An amp with flat tonal characteristics.
FLAT An amp with a classic bass sound.
VINTAGE An amp with a fat but sweet vintage sound.
MODERN An amp with a tight low end and a crisp high end.
ROCK An amp with a characteristic overdrive sound.
4
[MEMORY] button
Use the memory feature to store three different sets of knob
configurations for each amp type (p. 6).
5
[GAIN] knob
Adjusts the gain (amount of distortion).
6
[VOLUME] knob
Adjusts the volume before equalization and effects are applied.
2
7 8
2 3 4
9
5 6 11
7
EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of the middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
8
[EFFECTS] knob
Use this knob to switch between effects such as chorus or flanger,
depending on the knob's position.
Type
OFF
CHORUS
FLANGER
T-WAH
9
[DELAY/REVERB] knob
Use this knob to switch between effects such as delay or reverb,
depending on the knob's position.
Type
OFF
DELAY
REVERB
10
12 13 14 15
Explanation
Effects are not applied.
Chorus is an effect that creates a beautiful tonal
spaciousness and depth by adding a slightly
modulated sound.
Gives a twisting, flanged character to the sound.
You can produce a wah effect with the filter
changing in response to the bass level.
Explanation
Effects are not applied.
Changes the delay time and effect.
Adjusts the volume of the reverb.