Table of Contents
Advertisement
Panel Descriptions
Top panel
1
3
2
4
Rear panel/Bottom panel
14
20
Top Panel
1
[CH SELECT] button
Switches between the CLEAN channel and the LEAD channel.
Hold down this button for one second or longer to select
CUSTOM mode.
* In CUSTOM mode, sound settings can be made only using the
dedicated software.
http://www.boss.info/
2
INPUT jack
Connect your electric guitar here.
3
[BOOST] button
Boosts the gain. On the CLEAN channel, this produces a
pleasant crunch sound. On the LEAD channel, this produces
hard distortion.
4
[TONE] button
On the CLEAN channel, this makes the mid- and high-frequency
ranges sparkle, producing a crisp sound. On the LEAD channel,
this produces a fat tone.
5
CLEAN channel
Lets you create a broad range of sounds from undistorted clean
sound to light overdrive.
[VOLUME] knob
Adjusts the volume of the clean channel.
6
LEAD channel
[GAIN] knob
Adjusts the gain (amount of distortion) of the LEAD channel.
Turning the [BOOST] button on raises the gain of the LEAD
channel. Adjust the [GAIN] knob to change from crunch sound
to hard distortion.
4
5
6
7
8
[VOLUME] knob
Adjusts the volume of the LEAD channel.
7
EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
8
EFFECT
[DELAY] button
Turns the DELAY on/off.
[DELAY] knob
Adjusts the depth of delay effect.
[TAP] button
Sets the delay time. When you press this button two or more
times, the delay time is set to the interval between presses.
[REVERB] knob
Adjusts the reverb depth.
9
[PRESENCE] knob
Adds lustrous outline to the mid- and high-frequency range.
This is effective when you want to improve the definition of the
sound.
10
[MASTER] knob
Adjusts the overall volume.
9
10
11
12
15
16
17
18
19
13
Hide quick links:
Advertisement
Table of Contents
