EverFocus EDVR SERIES Instruction Manual page 23

○
Record status bar
5
The record status bar appears when you enable a status bar on the screen (Please
th
see 8 item of DISPLAY). Three parts which are current date, record status (% of
space used for recording) and current time.
Current Date
1. Current date
The current date which is set in the TIME/DATE SETUP MENU.
2. Record status
In case of activated recording, "R" + current HDD no, is displayed "R01": R -
Record, figure shows the currently recording HDD no., here: No.1.
3. Event
The last happened event.
4. Current time
The current time which is set in the TIME/DATE SETUP MENU.
5. HDD/Fan status"No Disk", it shows when no disk is installed or detected.
"No Fan", it shows when cooling fan stops working.
"HDD OT", HDD over temperature
Record Status Event
HDD/Fan Status
13
Current Time