Page 2
The illustration shows the application head M18 FOPH-LTA connected to the Milwaukee powerbase M18FOPH-0. This application head may only be operated in connection with the powerbase shown here. Depending on the equipment package you have purchased various application heads. Other application heads and powerbases can be purchased separately.
Page 4
Level the appliance. The blade should touch lightly the ground. click Adjust the strap. The carabiner should be a hand's width below your hip.
Page 5
click Quick release: In case of imminent danger, the device must be jettisoned quickly. To do this, open the lock and set down the device. Practise quick release. Do not throw the device during practice!
Page 6
min. 30 cm START Insulated gripping surface...
Page 10
4932 4801 80 Accessories / Spare parts 491 627 12 2,0 mm 491 627 13 2,4 mm...
Page 11
Milwaukee Distributors off er to retrieve old Beware of objects thrown by the cutting means. Clear debris like small stones, TECHNICAL DATA M18 FOPH-LTA gravel and other foreign objects from the work area before starting operation. Type Cordless Lawn Trimmer batteries to protect our environment.
REPLACING CUTTING LINE CAUTION! WARNING! DANGER! No-load-speed Use only MILWAUKEE trimmer line (see technical data). Replace the cutting trim hedges, bushes, or other vegetation Voltage line with either 6 m of 2,4 mm line or 7,6 m of 2 mm line. Note, when used near Direct Current abrasive surfaces or in dense growth, the cutting line will wear faster.