Changing Sewing Direction; Fastening Seams; Triple Stretch Stitch - Euro-Pro 372 Instruction Manual

Changing Sewing Directions
1. Stop the machine, and turn the balance wheel toward you to
bring the needle down into the fabric. Raise the presser foot.
2. Pivot the fabric around the needle to change direction as
desired.
3. Lower the presser foot and continue sewing.

Fastening Seams

1. For fastening the ends of seams, press in the reversing
button and sew several reverse stitches.
2. To remove the fabric, raise the presser foot and draw the
fabric away from you.
3. Cut threads on thread cutter at the rear of presser bar or
with a pair of scissors.
Leave about 15 cm (6 inches) of hread hanging from the
needle eye.

TRIPLE STRETCH STITCH

If you wish to sew stretch fabrics, this is the right stitch to avoid thread breaking. This is also very suitalbe
for seams that need great strength,e.g.crutch seams or pocket seams.
TRIPLE STRAIGHT STRETCH STITCH
Model 377
zigzag foot
Presser foot
Pattern selector M(
S.S.
Stitch length dial
Note: * Use a STRETCH needle.
The blue tipped shank needle effectively prevents
skipped stitches.
(Model 374/373/372)
Model 374 Model 373/372
zigzag foot
) 8( )
TRIPLE ZIGZAG STRETCH STITCH
Model 377
zigzag foot
Presser foot
Pattern selector O(
Stitch length dial
12
thread cutter
Model 374 Model 373/372
zigzag foot
) 7(
S.S.
)