Sewing Zippers - Euro-Pro 372 Instruction Manual

SEWING BUTTONHOLES (Model 377 and 374)
¡°¡±
(2).
(5).
SEWING BUTTONHOLES (Model 373/372)
¡°¡±
(2).
(5).

SEWING ZIPPERS

Model 377
zipper foot
Presser foot
M( )
Pattern selector
1 to 4
Stitch length dial
Raise the foot and the needle to its highest position by turning
the balance wheel towards you. Replace the foot with the zipper
foot.
1. Pin or baste the zipper tape to the fabric and place the work-
piece in position under the foot.
Attach snap on zipper foot so that the needle passes on its
left hand side.
* When starting sewing, both needle and bobbin threads ends
should be put away under the foot.
2. Sew on the right side of the zipper by guiding Zipper teeth
as close as possible to the needle drop. Before the foot reaches
the slider on the zipper tape, raise the foot and open the
zipper by keeping the needle in the fabric.
Lower the foot and sew on the remaining of the seam,
3. To sew the left side zipper change position of foot to bring
the foot to the left side of the needle. Sew on in the same
way as you did on the right side of zipper.
(1).
¡ ° ¡ ±
(3).
¡ ° ¡ ±
(4).
¡ ° ¡ ±
¡ ° §
(1).
¡°¡±
(3).
¡°¡±
(4).
¡°¡±
Model 374 Model 373/372
zipper foot zipper foot
A( )
1-3( )
1 to 4
15
(Model EP 377 and 374 only)
( Model 373/372 )
Zipper foot
tape
Elements
Fabric
Elements
Slider
Element
Needle
Zipper foot
Fabric
Element
Tape
Slider
Fia. 1