Table of Contents
Advertisement
The VMS should be checked periodically for its correct functioning and presence of the safety guards. And if
not found so, it should be reported to the responsible person/supervisor immediately so that a timely
action should be taken in order to restore the proper safety guards and correct functioning of the panel.
Caution: do not remove, deactivate or tamper with any safety and protection
equipment; doing so not only voids the warranty, but Aesys in no way remains liable
for the consequences.
Caution: never work on the display while it is connected to its electrical power supply.
2
.
2
S
u
i
t
a
b
i
l
i
t
y
o
f
2
.
2
S
u
i
t
a
b
i
l
i
t
y
o
f
The operators who are in charge of using these displays must be at least 18 years old and recognized by the
owner of the display as psychologically and physically fit to fulfill their responsibilities.
Note: the purchaser and user of the display must train his staff appointed to operate
on and servicing this panel and also about the safety equipment.
Caution: Aesys is not liable for any damage or injury resulting from use by unqualified
operators.
Aesys may agree to provide supplementary instructions to the operating staff through the supervision of its
own technical staff. Such services will be agreed upon after being defined in a separate contract.
Operators according to their responsibilities are classified as follows.
2
.
2
.
1
U
s
e
r
2
.
2
.
1
U
s
e
r
Definition: a person in charge of sending the messages to VMS from a PC (Personal Computer) located
in a Remote Operations Centre:
must be instructed well to use the software connecting to the VMS by training or initial
supervision;
He is not authorized to work on electrical or mechanical equipment of the VMS.
Aesys S.p.A. Via Pastrengo 7c - 24068 Seriate - BG - Italy • T. +39 035 29240 • F. +39 035 680030 • www.aesys.com -
o
p
e
r
a
t
o
r
s
a
n
d
m
a
i
n
o
p
e
r
a
t
o
r
s
a
n
d
m
a
i
n
User and Maintenance Manual [ENG] - rel.00 (26/03/2018)
t
e
n
a
n
c
e
s
t
a
f
f
t
e
n
a
n
c
e
s
t
a
f
f
Registered office
Display Series Minerva Monochromatic
: Via Artigiani 41 - 24060 Brusaporto - BG – Italy
Pag.8 di 45
- Quick Links:
- Controller Dc600
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
