Safety Criteria; General Instructions - AESYS Minerva Series User And Maintenance Manual

2 . S A F E T Y C R
2 . S A F E T Y C R
During the designing and constructional phase of these displays, all the suitable measures and important
criteria have been adopted to satisfy the essential requisites of the following directives:

Low Voltage Directive;

Electromagnetic Compatibility Directive.
Note: Aesys is not liable for any damage or injury resulting from failure to observe the
safety instructions and recommendations given in the documentation.
Note: Aesys is not liable for any damage or injury resulting from the messages
displayed by the user on the VMS.
2 . 1 G e n e r a l i n s t r
2 . 1 G e n e r a l i n s t r
Please read this manual carefully before installing, activating, using, servicing or working on these VMS in
any way. Do not allow inadequately trained staff to work on them.
Operators working on these VMS must use suitable PPE, such as boots, reflective jackets, helmets, eye
glasses, gloves, etc.
Caution: Aesys declares that the purchaser is responsible for the operations done on
the panel, if he fails to observe the instructions given in this manual.
Note: observing standards and using safety equipment properly enable the operator to
work in the best conditions without the risk of injury to anyone.
Aesys S.p.A. Via Pastrengo 7c - 24068 Seriate - BG - Italy • T. +39 035 29240 • F. +39 035 680030 • www.aesys.com -
I T E R I A
I T E R I A
u c t i o n s
u c t i o n s
Display Series Minerva Monochromatic
User and Maintenance Manual [ENG] - rel.00 (26/03/2018)
: Via Artigiani 41 - 24060 Brusaporto - BG – Italy
Registered office
Chapter
2
Pag.7 di 45