Main Components; Identifyng Spare Parts - AESYS Minerva Series User And Maintenance Manual

8 . M A I N C O M
8 . M A I N C O M
For the main components of the VMS of series Minerva monochromatic, please refer to the documents
attached to this manual.
8 . 1 I d e n t i f y n g s p
8 . 1 I d e n t i f y n g s p
Each component of the panel (boards, wiring, etc ...) can be identified through a label or a sticker which is
actually pasted or printed on these components. This label carries the information like "Aesys code" and
any code of Release: see for example Figure
This combination of Aesys Code and Code of Release (example: 140031493-D) allow the users to identify
the uniqueness of the component.
Please refer to the paragraph para Errore. L'origine riferimento non è stata trovata. "Errore. L'origine
riferimento non è stata trovata." to see the list of the main components.
Note: when ordering the spare parts to Aesys Customer Service, always specify this
combination of Aesys Code and Release (if present).
Figure 8-1: facsimile of an identifying label with code and release applied on an electronic board
Aesys S.p.A. Via Pastrengo 7c - 24068 Seriate - BG - Italy • T. +39 035 29240 • F. +39 035 680030 • www.aesys.com -
P O N E N T S
P O N E N T S
a r e p a r t s
a r e p a r t s
& the Figure
8-1
Figure 8-2: example of code and release imprinted on a wiring cable
Display Series Minerva Monochromatic
User and Maintenance Manual [ENG] - rel.00 (26/03/2018)
.
8-2
: Via Artigiani 41 - 24060 Brusaporto - BG – Italy
Registered office
Chapter
8
Pag.43 di 45