Check The Cooling Unit Parts And The Filling Chamber Screen; Assembling The Cooling Unit - Vapormed Mighty Plus MEDIC Instructions For Use Manual

6.2.3 Check the Cooling Unit Parts and the Filling Chamber Screen

X Check all parts for damaged surfaces, cracks, softening, hardening, em-
brittlement, contamination or discoloration.
X Discard damaged parts.

6.2.4 Assembling the Cooling Unit

CAUTION
Plant particles in the Cooling Unit
Clogging of the Cooling Unit
Inhalation of plant particles
• Insert the Screen correctly into the Cooling Unit Cap.
X Assemble the parts in reverse order.
X Insert the small Base Seal Ring completely into the Cooling Unit Cap.
Ö The small Base Seal Ring is no longer visible.
X When assembling, make sure that Seal Rings are properly seated.
X Insert Screen in the groove provided for this purpose.
6 C L E A N I N G / H Y G I E N E
X Place all parts of the Cooling Unit
(except the Cap Lock) and the Filling
Chamber Screen in isopropyl alco-
hol for a maximum of 1/2 hour.
X If necessary, wipe the Cap Lock with
isopropyl alcohol.
X Rinse all parts under running water
for at least one minute.
X Let all parts dry completely.
27