Phonebook Operations - EnGenius DuraFon 4X Manual

Press "4" to set up the flash time from 100ms, 200ms, to
900 ms (9 levels to choose from.) For example, press "2" if
the desired flash time is 200ms.
e. Line detect:
Press "5" to set up the line detect to be either "On" or
"Off." Press "1" to choose "On" or press "2" to choose
"Off."
Notes:
1. De-registration by the administrator will disable a handset's
ability to use the base station to make or receive phone calls.
This also frees up the ID for future registration.
2. Handsets de-registered by the administrator can still perform
intercom to other handsets.

Phonebook Operations

1. You can store up to 30 entries in the phonebook. Each entry
can contain a phone number or handset ID (up to 28 digits)
and a name (up to14 characters).
2. To access phonebook, press menu follow by "2" or
scrolling key when handset in standby mode.
3. To add a new entry:
a. Press ADD soft key.
b. Enter a phone number when LCD prompts "Number?"
Use DELETE soft key to delete the last digit entered.
Press SAVE when completed.
c. You will then be prompted to enter a name for the phone
number just entered.
(1) Press SAVE key to enter a phone number without a name.
All records without naming will be placed on top of the list,
in the order they are entered.
(2) To enter the name, press the corresponding keypad
number one or more times according to the order of the
character on the key.
(3) Use DELETE soft key to delete the last character entered.
When completed, press
selection.
or
SAVE soft key to confirm your
45
Notes:
1.
When enter a phone number, the cursor automatically advances to
the next digit field. Use or
backward or forward to insert or delete.
2.
When entering a name, the cursor automatically advances to the
next character field if you press a different key for the next
character. If you need to enter consecutive characters from the
same key, you can wait for the cursor to advance or use
scrolling key to move the cursor backward or forward manually.
Also use or to move the cursor to insert or delete.
3. By default, all letters are entered in the upper case. Use the * key to
toggle between upper and lower cases.
4.
A "Pause" entry represents a 2.8 second delay in dialing the
following digits, which is useful when calling a sequence of
segmented numbers (e.g., access code, credit card number, auto-
attendant entries, etc.) Pause is entered by pressing the * key twice
(LCD displays P). Entering pause twice (PP) will result in 5.6
seconds pause in the dialing.
4. The entries are alphabetically sorted and stored as a list in
an ascending order (A to Z) from the top of the list.
a. If the phonebook is entered from the menu, the first
entry displayed is the top of the list.
b. If the phonebook is entered using the
entry displayed is the top of the list.
c. If the phonebook is entered using the
entry displayed is the bottom of the list.
5. The first line of LCD display shows name and the 2
shows the phone number. If the phone number is longer
than 14 digits, press OPTION
view the complete number.
6. To search for a record:
a. Use or scrolling key to enter the Phone Book mode.
b. Press a key that corresponds to the first character of the
name you are looking for.
c. For example, you are looking for "EnGenius", and then
press the number "3" once.
d. Use or scrolling key to locate the exact record you
are looking for.
7. To erase phonebook:
a. Use or scrolling key or the alphabetical search
scrolling key to move the cursor
or
arrow, the first
arrow, the first
nd
line
soft key and select Option 3 to
46