Vitek VT-1450 Manual Instruction page 7

RECOMMENDATIONS ON USING THE
ATTACHMENTS FOR PROCESSING PRODUCTS
Product Recommended
type attachment
Making may- Blender
onnaise attachment
Note:
All data in this table are given as recommendations.
CLEANING
1. Unplug the unit before cleaning.
2. Remove the attachment. Use a slightly damp cloth
to clean the motor unit (2), then wipe the blender
attachment (1) and the motor unit (2) dry.
3. After processing salty and sour products, it is neces-
sary to rinse the blender attachment (1) with water
immediately.
4. While processing products with strong dyeing proper-
ties (for instance, carrot or beet-root) the attachment
can get colored, wipe the attachment with a cloth
dampened in vegetable oil.
5. Wash the attachment if it contacted with products
with warm water and a neutral detergent and dry it
thoroughly after use. Wash only the lower part of the
blender attachment (1).
Do not immerse the motor unit (2) into any liquids, do not
wash it under water jet or in a dishwashing machine.
STORAGE
•
Clean and dry the unit thoroughly before taking it
away for long storage.
•
Do not wind the power cord around the motor unit.
•
Keep the unit out of reach of children and disabled
persons.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 300 W
Max. power: 800 W
ENGLISH
Speed/ Quantity Dura-
Operating
mode
II 250 ml
7
tion
35 sec.