Vitek VT-1450 Manual Instruction page 6

ENGLISH
ingredients and making cocktails (for processing fruit
and vegetables containing enough liquid).
WARNING: Before assembling and installing attach-
ments, make sure that the power plug is not inserted
into the mains socket.
– Insert the blender attachment (1) into the motor unit
(2), having preliminary matched the correspond-
ing guides inside the motor unit (2) and the blender
attachment (1), and turn the blender attachment (1)
counterclockwise until bumping.
– Insert the power plug into the mains socket.
– Immerse the blender attachment (1) into the bowl
with food that you want to chop/mix.
ATTENTION! While processing products keep the unit
vertically.
– To switch the unit on, press and hold down the but-
ton «I» (3).
– Use this operation mode for mixing liquid products.
– If you press and hold down the button «II» (4), the
unit will operate at maximum rotation speed. Use this
operation mode for combined processing of liquid
and solid foodstuffs.
Note:
– Products should be put into the bowl before the unit
is switched on. The amount of products to be pro-
cessed should not exceed 2/3 of the capacity of the
bowl in which they are processed.
– Before starting to chop/mix, we recommend to peel
fruit, remove inedible parts, such as stones, and cut
fruit into cubes approximately 2х2 cm in size.
– After you finish using the unit, take the power plug out
of the mains socket and remove the blender attach-
ment (1), turning it clockwise.
ATTENTION!
– Do not remove the blender attachment (1) during
operation.
– To avoid damaging the blades, do not process too
hard products such as cereals, rice, spices, coffee,
cheese, frozen food, etc.
– If the foodstuffs are hard to chop with the blender
attachment, add some liquid if possible.
ATTENTION!
Strictly follow the described sequence of operations.
6