Table of Contents
Advertisement
Start Asterisk by executing command:
# asterisk -vvvvvvgc
If Asterisk is already activate, run "asterisk –r" instead. In the CLI,
please run the following command:
localhost*CLI> gsm show spans
GSM span1: Provisioned, Up, Active
GSM span2: Provisioned, Up, Active
GSM span3: Provisioned, Up, Active
GSM span4: Provisioned, Up, Active
If the SIM cards have setup and Asterisk loaded successfully, GSM spans
will show up and active.
3.5 Dialplan edit
Add dial plan in the file extension.conf. Users must make sure that the
context "from-gsm" and "from-internal" are in extensions.conf, here a
simple example is given:
# vim /etc/asterisk/extension.conf
OpenVox Communication Co. LTD.
http://ArtTel.ru
Figure 12 channels' status
G400P User Manual
23
URL: www.openvox.cn
Advertisement
Table of Contents
