Driver Loading And Asterisk Initiation - OpenVox G400P User Manual

patching and recompiling, if successfully done, you are going to install
Asterisk.

3.4 Driver loading and Asterisk initiation

Until now, you have set all necessary files, please load the driver and
Asterisk in the following way:
# service dahdi start
# depmod -a
# dahdi_genconf
# dahdi_cfg –vvvv
# dmesg
The following figure shows dmesg outputs information
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Found an OpenVox G400P: Version 1.1
opvxg4xx: slot 0 is Installed
opvxg4xx: slot 1 is Installed
opvxg4xx: slot 2 is Installed
opvxg4xx: slot 3 is Installed
opvxg4xx: Powering up all spans...
OpenVox Communication Co. LTD.
http://ArtTel.ru
Caution: If there is something wrong when compile
DAHDI, please refer to HERE. With this link, the
moderator introduces you a method how to patch. After
Figure 11 dmesg outputs information
G400P User Manual
22
URL: www.openvox.cn