Table of Contents
Advertisement
Page 3
IP CAMERA USER MANUAL
Port and IP setup
④ Go to the router's management interface through IE browser to forward the IP address and
port of the camera to the "Virtual Server". In the picture example below you will see an
example of the setting as if the IPC IP address is "192.168.6.6" and the ports are default (9008
& 80)
Router Setup
④ Open the IE browser and input your WAN IP and HTTP port to access the camera.
2 IPC Configuration
In this chapter, we will go through the configurations of the IPC.
2.1 Video Configuration
Camera Configuration includes five submenus: Image Setup, Video Stream, OSD Config,
Video Mask and Motion Detection area configuration.
2.1.1
Video Setup
Go to "Media" "Video Setup" interface as shown below.
Advertisement
Table of Contents
Need help?
Do you have a question about the I3-330WIP536 and is the answer not in the manual?