Contents Cautions: Product Introduction Camera Introduction Product Features Menu Setup Product Installation General Notes Installation Tools and Information Installation Method Setting the video output type Setting the Camera Connection OSD Control Technical Specification...
Page 3
6. In order to ensure smooth and satisfactory image, 1 Cautions: the power and video cables shouldn’t be too long. Please follow general AHD/Analog sepcifications for 1. To reduce the risk of electric shock, do not open the cables types and lenghts. camera or perform internal maintainance by yourself.
2 Product Introduction 3 Menu Setup 2.1 Camera Introduction AHD/TVI: Click on “Iris+” button from the DVR’s PTZ interface to call the OSD Menu. Use the PTZ interface to PROVISION-ISR’s new series of cameras have scroll through the menu and “Iris+” to confirm. adopted a high performance CMOS image sensor which provides HD resolution and supports high CVI: Click “...
4.2 Installation Tools and Information: 4.5. Setting the camera: Prepare the required tools and instructions. Before a. Dome Camera installation please prepare the following tools: A straight or a Phillips-head screwdriver, multi-meter, Adjust the lens position so it aims at the main monitoring cutter, needle nose pliers, measuring tape, pencil.
4.6 Connection Connection as shown in the figure below: 4.7 OSD Control The OSD control is available by CoC (Control over Coax). If your AHD/TVI/CVI DVR supports this function*, use the DVR’s PTZ interface to press on “Iris+” or “ ”...
Need help?
Do you have a question about the DI-390AHD36+ and is the answer not in the manual?
Questions and answers