Suitable options will automatically be indicated
when the cycle is selected.
To add options, press the corresponding options
buttons to illuminate the selections desired. To de-
lete options, press the options buttons again and
the indicator lights will turn off.
Not all options are available with every cycle. The
indicator will not light if the option is not available
with that cycle.
To change the options once the cycle has
begun, press the pause button, make the new
selections and press start again.
All options selected for the cycle, except sanitize,
will be remembered and recalled each time that
cycle is selected in the future. To prevent uninten-
tional and accidental exposure of delicate material
to sanitize heat, the sanitize option will not be
remembered and must be reselected each time.
The sanitize option will be retained and recalled if
it is selected and saved in the my favorite cycle.
For loads that contain some items you plan to hang
dry, flat dry or iron, add the damp alert option to
any Auto Dry cycle. A signal will sound when the
load has reached the damp dryness level to remind
you to remove those items to hang dry, dry flat or
iron dry. Open the door, remove those items, close
the door and press the start button to continue dry-
ing the remaining items.
Select the extended tumble option if the dried
load might not be removed promptly at the end of
the cycle. The dry load will tumble continuously
without heat for 30 minutes.
displayed and a chime will sound every 5 minutes
to remind you to remove the dried load.
The wrinkle release option can be selected with
extended tumble to increase the amount of time
the load will tumble without heat. Use this combi-
nation if you know it will be more than 45 minutes
before you can remove the load.