Screen Adjustment; Digital Input; Analog Input; To Adjust Flickering And Position [Screen] - Eizo FlexScan S2231W User Manual

2-2 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the
preset data of the monitor. No screen Adjustment is required.

Analog Input

The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
The auto-adjustment function works in the following cases:
• When a signal is input into the monitor for the first time
• When a signal is input into the monitor for the first time after the
resolution or refresh rate of input signals is changed
[Adjustment Procedure]
Automatic Adjustment
1
To adjust screen automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
(2) Choose <Execute> with
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If satisfactory adjustment cannot be obtained with the auto-
adjustment function, perform the adjustment following the
procedure below. When the screen is displayed correctly, go to step
4 "Range Adjustment".

Advanced Adjustment

2
Run the Screen Adjustment Program.
12
Chapter 2 Settings and Adjustments
or , and press
d a M r
.
.
g a a M r T± g a