Edit Program - Elation 216 User Manual

9.6 "Edit" Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom programs to
be installed and recalled directly from the fixture's control board. Programs can be
created and stored using the fixture's control board or by using an external DMX
controller. For detailed instructions on how to complete this task please see "Working
with Built-In Programs" Section 12/ Page 31.
Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode" under
"Program Run."
Edit program – This function allows the user to edit the built-in programs.
Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
©Elation Professional, Los Angeles Ca. 25
ELAR 216 Panel
www.ElationLighting.com
™