Operating With Remote Control - Eiki LC-XGC500 Owner's Manual

Basic Operation

Operating with Remote Control

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
AUTO PC button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 38 for
details.
INFO . button
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again or Point
The information window can also be selected from the
menu.
D .ZOOM button
Press the D.ZOOM button on the remote control to enter to
the Digital zoom +/– mode. See page 47 for details.
SCREEN button
Press the SCREEN button on the remote control to select
the desired screen size. The selected screen size symbol
appears on the screen for 4 seconds. See pages 45–48 for
details.
LENS SHIFT button
See page 28 for details.
ZOOM buttons
Press the ZOOM buttons on the remote control to zoom in
and out the image.
FOCUS buttons
Press the FOCUS buttons on the remote control to adjust
focus of the image.
30
Remote Control
AUTO PC
button
D .ZOOM
button
ZOOM
buttons
FOCUS
buttons
buttons.
7 8
✔ Note:
• See the next page for the description
of other buttons.
Information Menu
* The H- and V-sync freq. values described in this figure
may be different from the actual values.
FREEZE button
INFO . button
POINT
ed
buttons
SCREEN button
LENS SHIFT
button
Information Menu