Installation; Positioning The Projector; Moving The Lens - Eiki LC-XGC500 Owner's Manual

Eiki internationl multimedia projector owner's manual
Table of Contents

Advertisement

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit
ambient lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Screen Size
(W x H) mm
4:3 aspect ratio
Zoom (min.)
Zoom (max.)

Moving the Lens

For details about the Lens shift function, refer to "Lens Shift Adjustment" on page 28. The amount of lens shift
range varies depending on the lens. The figures below are for LC-XGC500.
18
(for LC-XGC500)
22.0' (6.7m)
16.4' (5.0m)
10.8' (3.3m)
3.9' (1.2m)
100"
78"
30"
30"
100"
610 x 457
2032 x 1524
3.9' (1.2 m)
14.1' (4.3 m)
–––––
10.8' (3.3 m)
uppermost
leftmost

Installation

32.8' (10.0m)
200"
150"
155
116"
150"
3048 x 2286
4064 x 3048
21.3' (6.5 m)
28.5' (8.7 m)
16.4' (5.0 m)
22.0' (6.7 m)
downmost
rightmost
(Inch Diagonal)
300"
230"
200"
300"
6096 x 4572
–––––
32.8' (10.0 m)
Max . Zoom
Min . Zoom
(Center)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-wgc500aLc-wgc500alLc-xgc500l

Table of Contents