Indicators And Projector Condition - Eiki LC-XGC500 Owner's Manual

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally .
Indicators
WARNING WARNING
POWER
TEMP . FILTER
green / red
red orange
✽ ✽
red
✽ ✽
green
✽ ✽
green
✽ ✽
red
✽ ✽
red
✽ ✽
green
✽ ✽
red
✽ ✽
green
✽
✽
Fig .1 Filter replacement icon and "Please wait... "
• • • on
• • • off
LAMP 1/2
SHUTTER
REP .
blue
yellow
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-
✽ ✽
BY button to turn on the projector.
The projector is operating normally.
✽
(The Shutter is open)
The projector is operating normally.
✽ (The Shutter is closed)
The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
turned on until cooling is completed and the POWER
✽
✽
indicator lights red.
The projection lamp is being cooled down in the Power
✽
management mode.
The projector is in the Power management mode.
✽
The projection lamp is being cooled down in the Shutter
✽
management mode.
The projector is in the Shutter management mode. Press
✽
the ON/STAND-BY button to turn on the projector.
✽
✽
The filter is scrolled using the Filter control function in the
setting menu. When the filter is being scrolled, the Filter
replacement icon and " Please wait... " message (Fig. 1)
appear on the screen.
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
• • • Differs according to conditions.
✽
Appendix
73