Input Source Selection - Eiki LC-XGC500 Owner's Manual

Input Source Selection

Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Input Menu icon.
2
Use the Point buttons to move the red arrow
ed
pointer to the desired input and then press the
SELECT button. The signal format menu appears.
3
Use the Point buttons to select the desired signal
ed
format and then press the SELECT button.
INPUT 1
When the RGB PC (analog) signal is
RGB (PC analog)
connected
When the RGB PC (scart) signal is
RGB (Scart)
connected
When the RGB PC (digital) signal is
RGB (PC digital)
connected.
When the HDCP video signal is
RGB (AV HDCP)
connected.
INPUT 2
When the RGB PC signal is connected.
RGB
When the RGB video signal is
Video
connected.
When the component signal is
Component*
connected.
* If the projector cannot reproduce proper video image, select a
system manually (see "Video System Selection" on page 36).
INPUT 3
When the video signal is connected.
Video*
When the S-video signal is connected.
S-video*
* If the projector cannot reproduce proper video image, select a
system manually (see "Video System Selection" on page 36).
7 8 buttons to move the red
Input Menu
Input Selection
35