Wieland podis MOT FP C Operation Manual page 36

Commissioning | 5
Select the S7-CPU used (CPU 315-2 DP).
Selecting CPU
When selecting this CPU, a dialog box appears in which you must specify a PROFIBUS net-
work.
Enter the bus address of the DP master. The DP master is already integrated in the PLC you
selected and requires an address, just like every other network node.
In the Subnet dialog, you define the physical key features of the PROFIBUS-DP network the
way you want to use it. Press the New button and select the baud rate to be used. After return-
ing from this dialog, a subnet is defined.
5.4 Wieland Electric | BA000349 | 05.2007