User Manual
Technical Specifications
Features
•
The switch included 24-Port 10/100Mbps TP and 2-Port Gigabit Dual Media
TP/SFP or TP/GBIC.
•
Supports 24-port 10/100M TP ports with Nway and auto MDIX function.
•
24 Port 10/100Base-TX + 2 Port Gigabit TP/SFP switch supports 2 Gigabit dual
media ports(TP/SFP) and 2 slots for removable SFP module supporting 1000M
SFP fiber module.
•
24 Port 10/100Base-TX + 2 Port Gigabit TP/GBIC switch supports 2 Gigabit
dual media ports(TP/GBIC) and 2 slots for removable GBIC module supporting
1000M GBIC fiber module.
•
Supports on-line plug/unplug SFP/GBIC transceiver modules.
•
Meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications.
•
Web-Smart management.
•
Supports 802.1p, Port based QoS packet and can be classified with four priority
queues.
•
Supports 802.1Q-based VLAN with 26 entries.
•
Protected port support.
•
MAC-based trunking with automatic link fail-over.
•
Support programmable per-port storm control.
•
Per-port ingress/egress rate control with 64K/128K/256K (up to 100Mbps)
resolution.
•
8K MAC addresses with automatic learning and aging.
•
Programmable per-port flow control and back-pressure.
•
Maximal packet length can be up to 1536 bytes
•
Supports Ingress and Egress Bandwidth rating management.
•
Supports per port status for monitoring.
•
Supports per port media configuration.
•
Supports Port-based and 802.1Q Tag-based VLAN.
•
Supports Link Aggregation (Port Trunk).
•
Supports 802.1p Port Classification with four priority Queues.
•
Supports Port Mirror for sniffer.
•
Supports Broadcasting Suppression.
•
Supports Trap Host and Events Configuration.
•
Supports IP Configuration: IP Address, Subnet mask, Gateway.
•
Supports Trap Host IP.
•
Supports System Events: Warm Boot, Cold Boot, Illegal login.
•
Supports TP and Fiber Port Events: link up, Link down.
•
Supports Trap Events Counters.
•
Supports TFTP for firmware upgrade.
Publication date: July, 2006
Revision A2
Appendix A
62